Baron Air & Fuel_NEEDLE_JET KIT V-Star 650 Classic_C Bedienungsanleitung PDF herunterladen

Page: 1BA-2410-00

NEEDLE/JET KIT - Yamaha XV650 V-Star 650 1998-2010

CAUTION: We strongly recommend that a qualified Yamaha technician

install this kit. Please read ALL of the instructions BEFORE installing

beginning the installation.

Revision: 3.5 - 01/22/2010

Install Time: 90 Minutes

INCLUDED IN THE KIT:

(6) Assorted Mikuni Main Jets

(2) Mikuni Pilot Jets

(2) Titanium Adjustable Needles

(2) E-clips

(8) Cap head Allen screws

TOOLS REQUIRED:

10 & 12 MM Wrenches & Sockets

Assorted Allen Wrenches

Phillips and Flat Tip Screwdrivers

Factory Service Manual

INSTRUCTIONS:

JET/NEEDLE Size & Setting Chart

STOCK AIR BOX or K&N REPLACEMENT FILTER REQUIRES: 100 Main Jet, 22.5 Pilot Jet, Needle with "e" clip

in #3 slot

BARON CHROME EXTRENAL BAK REQUIRES: 112.5 Main Jet, 22.5 Pilot Jet, Needle with "e" clip in #4 slot

STEALTH BIG AIR KIT REQUIRES: 130 Main Jet, 22.5 Pilot Jet, Needle with "e" clip in #4 slot

You will need to remove and disassemble the following components:

Fuel Tank

Factory Airbox

Carburetors

1. Remove the vacuum slide from the carburetor per Yamaha shop manual procedures.

2. Remove the OEM needle and spacer, noting the order of assembly.

3. Counting from down from the top (The blunt end closest to the grooves) of the adjustable needle, install new "e"

Clip in the specified slot of new adjustable Baron Needle as specified in chart at the top of this box.

4. Reinstall the OEM spacer under the e" clip just as it was on the stock needle.

5. Reinstall the vacuum slide along with the diaphragm spring.

6. Be sure the spring base cap, small spring and its containment cap along with the larger slide spring are reinstalled in

the same order as removed. Reattach the diaphragm cover and tighten it's screws.

Note:Verify the slide and the throttle linkage have full range of motion!

7. Drain the fuel from float bowl and remove the bowl cover.

Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or

fitment may be required. Barons bears no responsibility on installation costs associated with this product.

5221 Oceanus Drive Huntington Beach, CA 92649 (925)583-2499 - Ph. (714)901-0520 - Fax www.baronscustom.com [email protected]

1 2

Page: 1BA-2410-00 1
Page: 2BA-2410-00 2

Inhaltsverzeichnis

Seite 1 - Page: 1BA-2410-00

Page: 1BA-2410-00NEEDLE/JET KIT - Yamaha XV650 V-Star 650 1998-2010CAUTION: We strongly recommend that a qualified Yamaha technicianinstall this kit.

Seite 2 - Page: 2BA-2410-00

Page: 2BA-2410-00NEEDLE/JET KIT - Yamaha XV650 V-Star 650 1998-20108. Remove the OEM Main Jet and Pilot Jet, and replace them with the appropriate Mai

Kommentare zu diesen Handbüchern

Keine Kommentare

Baron Air & Fuel_NEEDLE_JET KIT V-Star 650 Classic_C Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Motorräder Baron Air & Fuel_NEEDLE_JET KIT V-Star 650 Classic_C herunter. Baron Air & Fuel_NEEDLE_JET KIT V-Star 650 Classic_Custom User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Motorräder Baron Air & Fuel_NEEDLE_JET KIT V-Star 650 Classic_C