Baron Suspension & Lowering_REAR LOWERING KIT Yamaha Bedienungsanleitung PDF herunterladen

Page: 1BA-7520-00

Rear Lowering Arm Installation for Yamaha Road Star/Warrior

WARNING: This installation requires lifting of the motorcycle. Serious injury

can result from an improperly secured motorcycle. Ensure that the motorcycle

is securely supported during this procedure.

Revision: 1.6 - 01/02/2012

Install Time: 1.5

INSTRUCTIONS:

All work must be performed by a qualified mechanic according to steps outlined in the authorized service

manual.

The operator must use extreme caution when operating a modified motorcycle, particularly while

familiarizing himself with its' altered handling characteristics.

Check your motorcycle for proper parking lean angle. After lowering the bike, your kickstand may require

adjustment.

INSTALLATION PROCEDURE

1. Place the motorcycle on a suitable stand so that the rear wheel is free of the ground.

2. Remove the rear wheel, lower drive belt cover and rear tire mud guard from the motorcycle. Refer to

illustrations below.

3. Remove the rear shock absorber and the OEM relay arm in the following order:

a. The self-locking nut, washer and bolt from the lower pivot on the relay arm.

b. The bolt and nut from the front of the shock absorber/connecting arm frame.

c. The self-locking nut, washer and bolt from the center pivot of the relay arm/connecting arm frame.

d. The self-locking nut, washer and bolt from the rear pivot on the top relay arm/shock absorber.

CAUTION: It is important to prevent the swingarm from dropping when removing the bolt from the shock

absorber/connecting arm.

4. Remove the shock absorber and relay arm from motorcycle.

5. Separate the shock absorber from the relay arm. Remove all of the spacers from the OEM relay arm and set

them aside for later use.

6. Seals and bearings must be installed in your new Barons Relay Arm prior to reassembly on the motorcycle.

CAUTION: We do not recommend reusing the old bearings from the OEM relay arm! These items are

proprietary to Yamaha and must be purchased from an authorized Yamaha dealer. The following is a list of

Yamaha part numbers for the replacement relay arm bearings and seals:

(2) Oil Seal #93109-17071

(1) Bearing #93317-31771

Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or

fitment may be required. Barons bears no responsibility on installation costs associated with this product.

5221 Oceanus Drive Huntington Beach, CA 92649 (925)583-2499 - Ph. (714)901-0520 - Fax www.baronscustom.com [email protected]

1 2

Page: 1BA-7520-00 1
Page: 2BA-7520-00 2

Inhaltsverzeichnis

Seite 1 - Page: 1BA-7520-00

Page: 1BA-7520-00Rear Lowering Arm Installation for Yamaha Road Star/WarriorWARNING: This installation requires lifting of the motorcycle. Serious in

Seite 2 - Page: 2BA-7520-00

Page: 2BA-7520-00Rear Lowering Arm Installation for Yamaha Road Star/Warrior(2) Bearing #93317-41761 (1) Bearing #93317-42060 7. Use the reverse of

Weitere Dokumente für Für Motorräder Baron Suspension & Lowering_REAR LOWERING KIT Yamaha

Um das Dokument anzuzeigen Baron Suspension & Lowering_REAR LOWERING KIT Yamaha Bedienungsanleitung

Baron Suspension & Lowering_REAR LOWERING KIT Yamaha Bedienungsanleitung (1 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Baron Suspension & Lowering_REAR LOWERING KIT Yamaha Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Motorräder Baron Suspension & Lowering_REAR LOWERING KIT Yamaha herunter. Baron Suspension & Lowering_REAR LOWERING KIT Yamaha Road Star_Warrior User Manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Für Motorräder Baron Suspension & Lowering_REAR LOWERING KIT Yamaha

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Motorräder Baron Suspension & Lowering_REAR LOWERING KIT Yamaha